1 / 2
Cura Infill Sample Swatches Version 2
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix of @scross01 model. All credits for the model goes to the original author.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 44
- Makes
- 0
- Views
- 193
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution
Recommended slicer settings, from the original post:
- Layer Height 0.2
- Top/Bottom Thickness 0.4
- Top Layers 0
- Wall Thickness 1.2 (Wall Count 3 with Line Width of 0.4)
- Print Thin Walls yes
- Infill Density 35%
When loading the .stl split the model into separate objects using the Mesh Tools plugin. Select each swatch tile and add a per model setting for Infill Pattern, set to the appropriately to match the tile name.
Second .stl file is with a little square to change filament colour. I printed the swatches in white and black to better see the infill pattern. With said settings filament change should be added at layer 2 and layer 3.