Framework Slim Ethernet Expansion Card
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Redesigned bottom case for the Ethernet Expansion Card to maintain the same thickness profile as other Expansion Cards.
- Rating
- 4.8 / 5
- Likes
- 54
- Downloads
- 206
- Makes
- 6
- Views
- 3,753
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- GNU General Public License v2.0
The Framework Ethernet Expansion Card has a thicker profile than the rest of the expansion cards and as a result protrudes from the bottom of the Framework Laptops and is incompatible with the standalone cases for the Framework Mainboard.
This redesigned bottom case maintains the same thickness as the other FW expansion cards. It should now be compatible across the board as the bottom does not protrude like in the original design.
Print with the USB-C opening facing the print bed and use tree supports on all flat unsupported surfaces for best results. A brim is recommended.
Printing it flat side down appears to also give good results! Make sure you enable supports, and thanks to @perryoncrack for the suggestion.
Suggested layer height is 0.2mm or less.
Assemble using original screws to self tap into the plastic.
Revision History:
v1.0 - First upload
v1.1 - Added fillets to match curvature of top case
v1.2 - Added add'l standoffs to better secure top case
v1.3 - Added version without internal snaps for when printing flat side down