Atomi Crystal Topper [Outdoor Light]
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A crystal themed topper for Atomi brand outdoor lights.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 25
- Makes
- 0
- Views
- 257
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I have the Atomi brand smart light/sconce from Costco (Model Number: AT1680) and wanted to make something fun to prevent birds from perching on the top of the light and defecating on it…
Insert the need for a crystal themed topper!
This is printed in two pieces - the crystal base, and the ring holder. For both, I would recommend printing in PETG, ABS or ASA (especially if living in a warm environment). The PETG seems to be holding up well, despite getting up to 100 degrees F here. Please note that you will have to bend the ring base slightly to slip this over top of the crystal base - this is intentional.
Use a transparent filament for the crystals! Please see below for a very generalized guide for the settings/filament used:
Crystal Base:
- Filament: Inland PETG Transparent
- Nozzle = 0.6 mm (Recommended, but not entirely necessary. See tip below.)
- Max Volumetric Speed = 9 mm^3/s
- Infill = Gyroid at 7% infill
- Tip: The slower you can go, the more transparent the filament will be! The 0.6 mm nozzle also produced a much more transparent result with respect to the 0.4 mm nozzle. If you happen to have one lying around, definitely use it!
Ring Holder:
- Filament: Elegoo PETG Rapid - Black
- Nozzle = 0.4 mm
- Max Volumetric Speed = 9 mm^3/s
- Infill = 100% OR increase walls to fill the object
Included are both STL and STEP files! Happy printing, and enjoy the extra character added to the light!