Drain Pipe Adaptor 50mm to 68mm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A pushfit adaptor from 50mm drain pipe to 68mm pipe.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 55
- Makes
- 0
- Views
- 297
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
This model enables water to flow from a 50mm drain pipe to a 68mm drain pipe. It is designed specifically to connect these two pipe sizes, ensuring a smooth transition for water flow.
Many thanks to huzy85 for the original model! I have modified and resized the original using PrusaSlicer to accommodate a 50mm pipe.
Printed in PETG with a Prusa MK4 using the 0.20mm Speed preset. Print time is approximately 2 hours. ABS is also a suitable filament option.
Note: I have only tested this model in PETG. Be aware that some shrinkage may occur with ABS, so you might need to resize the model to accommodate this filament choice.