One piece Su-47 multicolor aircraft
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
One piece Sukhoi Su-47 Berkut multicolor supersonic jet fighter.
- Rating
- 5 / 5
- Likes
- 93
- Downloads
- 599
- Makes
- 2
- Views
- 2,114
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Introduction:
One piece Sukhoi Su-47 Berkut multicolor supersonic jet fighter. One of the most famous aeroplanes with “backward wings”. I am a fan of the Ace Combat series and this was one of my favourites growing up :)
Credits:
Thanks to the amazing work from @fady modelling this iconic fighter jet! I just made it easier to print and added the colors :)
Printing details:
Layer height: 0.12mm
Material: PETG Prusa Galaxy black, signal white and lipstick red
Supports: Tree, organic, auto, 40 degrees threshold, build plate only
Print time: 27 hours
filament consumption: 281g (the aeroplane is 22 cm long)
Infill: None if printed at >45 degrees nose up in the sky
Orientation: printed at >45 degrees nose up in the sky
All these parameters are already set up in the bambustudio .3mf file :)
Assembly instructions:
None! This is an assembly-free model with the downside of using supports :)
Support removal
I found the supports to be extremely easy to remove at 0.12 mm. They mostly removed themselves when I bent the build plate :)
It was significantly harder at 0.3mm layer height when I did my “quick” initial print test, so you may want to keep the layer height low to get a good finish and easy support removal.
