1 / 6
Kia e-Niro Frunk supports
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Supports for Euro crate frunk
- Rating
- 5 / 5
- Likes
- 16
- Downloads
- 175
- Makes
- 3
- Views
- 1,951
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
See remixed designs.
Included files for printing the rubbers in TPU, but did not test this.
I did test the moulds to cast the rubbers with polysiloxane and silicone chaulk. The polysiloxane is with shore 65 a bit too hard to remove from the mould, and requires some force to put on the mounts.
The silicone is easy to remove from the mould and is easier to install (easier than the original rubbers). Mix silicone with a few drops of water in a plastic bag and pipe it in the mould. This makes is cure within a few hours instead of days.
A box of 150mm high fits including cover (+10mm)
- https://www.kruizinga.nl/opslag/kunststof-stapelbakken/euronorm-stapelbakken/search?euronorm-mm%5B%5D=600-x-400&minhoogte=140&maxhoogte=150
- http://www.hornbach.nl/p/dresselhaus-cilinderkopschroef-binnenzeskant-6x20-mm-galv-verzinkt-100-stuks/7750464/
- https://www.hornbach.nl/p/dresselhaus-zeskantmoer-zelfborgend-m6-din-985-galv-verzinkt-100-stuks/3830376/