Tiny portable pocket fan -40mm fan Remix
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A remix of the original tiny portable pocket fan by gokux to fit a bigger 40mm fan.
- Rating
- 1.5 / 5
- Likes
- 187
- Downloads
- 324
- Makes
- 1
- Views
- 3,885
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Follow the original instructions provided by gokux.
If you having problems printing the top part just turn the logo up and use supports.
Parts that i used:TP4056 charging module glued on the battery-40mm fan-a litlle slide button you can use a bigger one you just need to edit the model or drill it bigger-battery if your battery can output more current obviusly it can give more power to the fan if its needed, try going up of 300mah but 200 already works-Led glue it with hot glue were the litlle holes are.
TIP: If your battery is to thin use a piece of cardbord or paper so the charging port can be in the right place.