1 / 3
Modular insect net frame/window
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€10.83 – €13.24 net (excluding VAT)
For file: mosquitoNetWindow_0.4n_0.2mm_PETG_XLIS_9h57m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €12.04 excluding VAT (range midpoint).
- Weight reported by the author
- 194 g
- Print time reported by the author
- 9.96 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
a modular frame for window mosquito net
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 168
- Makes
- 0
- Views
- 1,939
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Standard Digital File License
Bill of materials:
- PETG filament
- 12 M3x16 (or M3x14) screws
- mosquito net
- TPU filament (optional)
- superglue
- 2 magnets : 6x3mm
Assembly instructions
- print the parts:
- assembly the rectangle frame using 4 bars and 4 corners, that snap together:
- press the magnet into the middle hole of the long bar using the 2 magnets, so the second magned is flushed to the back surface. The second magnet will be glued to the window frame, later. Here is the top view:
- prepare the mosquito net
- cut the mosquito net:
- use strings of filament to secure the mosquito net to the frame (if using TPU, the string can be long):
- install the hinges (the leaf part of the hinge) and the handle, using M3 screws:
- position the frame on the window the determine the perfect sport. apply superglue to the surface the first hinge knuckle, put it in the leaf hinge and press to glue the hinge knuckle to the window frame. Remove the mosquito frame and let it 10 minute to stick. Repeat for all 4 hinges and wait 1 hour. Result:
- apply a small amount of superglue on the second magnet, close the frame and press it so magnet sticks to the window frame. After 10 minute, leave it for an hour to stick:
Congratulations