Xshot Ragefire Chainsaw-style rear grip V1

When modifying my Ragefire, I ran into two issues: 

1. The replacement microswitches I had bought were much larger than the stock switches, and wouldn't fit into the blaster easily.
2. The Ragefire's paddle-style grip makes it uncomfortable and difficult to fire it from the hip.

Some measurements, a few days, and several prototypes later, I ended up creating this thing. It's still a bit crude and chunky, but I plan to revise the ergonomics and trigger itself in a second version.

I printed mine out of ABS using 10% gyroid infill and 4 walls for all the parts. I'm not sure how well other materials will hold up.

Hardware & tool list:

• 2 microswitches, these are what I used: https://outofdarts.com/products/21a-microswitch-lever-tezuo?variant=40751150792746
  • 1 button-style switch
  • 1 lever-style switch
• 8 x M3 hex nut
• 8 x M3*30mm bolt
• 2 x M3*25mm bolt
• 1 x 0.5*6*20mm compression spring
• Wire of your choice, wire soldering equipment, solder, etc.
• Superglue

I'll attach an instruction document soon.