1 / 3
Pendulum Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Pendulum mount for the physics lab.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 28
- Makes
- 0
- Views
- 252
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Physics & Astronomy
- License
- Creative Commons — Attribution — Noncommercial
This pendulum mount was designed because my rods were larger than standard rods. I printed mine in PLA, but you can print them in whatever material you would like. PLA is surprisingly strong. I have also printed them in PETG-CF, but they tend to bend a bit more. I would recommend printing them with an infill greater than 50%.
You will also want to make sure your orientation is WITH the bed's movement. I had trouble printing these at first.
This model requires the following hardware:
- 4 ¼ nuts
- 4 ¼ bolts ¾ inch length
- 4 ¼ washers
After you print these, consider making some drawer organizers!