1 / 3
Photon Mono M7 Pro Drip Adapter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
It’s a permanently installed adapter so you can set the build plate at an angle to let the resin drip off faster.
- Rating
- 5 / 5
- Likes
- 116
- Downloads
- 1,934
- Makes
- 9
- Views
- 4,642
- Reviews
- 10
Updated at source:
Model information
- Source
- Printables
- Category
- Anycubic Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This adapter is designed to be installed on the build plate and left on. It won’t interfere with normal printing and is set up so it won’t dip into the resin.
It can be printed on either a fdm printer (i used my K1) or on the mono m7 pro itself. If using fdm, it is recommended to print at .1mm layer height so the built in threads work properly.
You’ll need 4 M3 screws to attach the locking tabs. Any screw length between 6mm and 12mm will work.