Multiboard Hex Key / Allen Wrench Holder (Metric)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A complete Metric Hex Key Set Holder designed for Multiboard using a SlideCleat Connector
- Rating
- 4.286 / 5
- Likes
- 88
- Downloads
- 934
- Makes
- 7
- Views
- 3,986
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
This is a complete Metric Hex Key Set Holder designed for Multiboard using the SlideCleat for Multiboard Connector. For installation you'll need to thread two SlideCleat Connectors into your multiboard tiles and simply slide this Hex Key / Allen Wrench Set holder over the SlideCleat until it clicks into position for a snug and secure connection.
**Printing Instructions**
Model is provided in the orientation it should be printed in.
Walls: 3
Layer Height: .2mm
Infill: 15% Grid/Gyroid
Supports: None
Enjoy!
Credits to the man, the myth the legend… Jonathan @ (KeepMaking) for creating multiboard.