1 / 3
Bosch MMU4 foot
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement feet for Bosch MMU4 kitchen machine
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 11
- Makes
- 0
- Views
- 100
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The original feet of our Bosch MMU4 machine were broken.
The replacement would have cost 15€+ so I designed new ones
Printed in “extrudr TPU flex medium” and I used the “FLEX” setting from prusa slicer with the following adjustments:
- Infill: 0-5% Grid
- Perimeter: 1
- Top perimeter: 3
- Cooling: 30% (otherwise, the print will be too hot, since the speed is very low)
Since my print was not very sticky, I used some foam pads.
Depending on your printer, you might need to check the dimensions of the final print and adjust accordingly.