1 / 2
IKEA Alex Gridfinity Inlay
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I've made a Fusion 360 model for laser cutting the grid in 4mm plywood.
- Rating
- 4 / 5
- Likes
- 37
- Downloads
- 170
- Makes
- 1
- Views
- 3,388
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
In Fusion 360, you can adjust the dimensions and positioning of your plate design by navigating to "Modify -> Change Parameters." Here's how you can modify each parameter:
- grid_width: Set this to the desired width of your plate.
- grid_height: Set this to the desired height of your plate.
- material_height: This is used to represent the thickness of the plate in 3D space.
Positioning adjustments:
- center_left: Set this to 1 to center the grid to the left or 0 to align it with the edge.
- center_length: Set this to 1 to center the grid along the length or 0 to align it with the edge.
For laser cutting, such as using Lightburn, go to the "Sketches" panel, select the third sketch, right-click, and choose "Export as DXF." This will prepare your design for laser cutting.