Klickfast Keyring Attachment
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A klickfast attachment with a hole to attach a keyring.
- Rating
- 5 / 5
- Likes
- 12
- Downloads
- 212
- Makes
- 2
- Views
- 838
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Simply print, attach a keyring/keys and click into a Klickfast dock
Recommended Printing:
0.20mm layer height
100% infil
Use normal supports (snug style works for me)
Orient on short side with hole at top (see image)
Use PETG, ABS, PC or PA for best results
Note: orienting on short side should increase shear strength of the column/pillar between the stud and rectangle. However, this orientation will make the hole cutout into more of a oval than a circle.
Material Testing
Most material testing happened with another model that shares the same stud and standoff design.
In short, PLA was very weak and unsuitable for actual use. ABS was much better but lacked shear strength thus would often fail/snap where the standoff meets the stud.
PC has been by far the best material I've tested so far but still needs more real world testing.
Should be noted that Peter Jones (who make Klickfast) mention they use Nylon for all of their plastic products.