Moss Pole (Stake clip)

Stake Clip for the Moss Poles (Original (118mm) & Petit (70mm)) by MochPoch

New Bamboo moss pole system has been released. Click here 🌱

As with conventional moss poles that get top-heavy over time, adding a stake is the usual next step.

Licensing

If you'd like to support my projects or obtain a commercial license, consider joining my Patreon membership: 
https://www.patreon.com/MochPoch 

For one-time support, you can also fuel my creativity with a cup of coffee: 
https://buymeacoffee.com/MochPoch 

Build and Assembly

The clips are available for 2 versions of the pole:

1. Original (118mm)
2. Petit (70mm)

This two-sided clip snaps onto the backing of the moss pole and the stake. Position the wider opening of the stake clip pointing downwards. This will prevent the moss pole from releasing itself from the stake if it tilts forward. It will also ensure that the pole clip hugs the pole backing snugly. 

The pole clip has 3 options:

Some Notes

• One could probably fit other stake dimensions, but I haven't tested beyond what I have listed above.
• The best stability addition that one can use is a heavy planter. Ensure that the stake is also placed in the planter.

Print Configuration

I recommend PETG as it is more flexible for snapping the pole and stake on. I have tried using PLA, but it was harder to snap on.

Improvements

• Requests are welcome - should you need a different dimension or a part specific to your need, let me know and I will try my best to make it available.

Thanks for checking out this attachment (and for reading up to this point). If you like what you see, don't forget to hit the like button and add a make. Your support helps me collect Prusameters and keep this project going. If you want to support even more, I would appreciate a cup of coffee. Good luck with growing the plant(s)! :D

Versioning