Silly Shell Adapter for Rival Fate
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple way to modify your rival fate to take silly shells
- Rating
- 4.333 / 5
- Likes
- 55
- Downloads
- 169
- Makes
- 4
- Views
- 1,256
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Are you as broke as I am? Do you still need a way to take out special zombies at HvZ events? Then this remix is for you! Simply print out the two halves, screw them together with two 16mm M3 screws and two M3 nuts, improve your PT seal, add an o ring to the front, chuck it in your nearest rival Fate, and you're set!
If you want to use the ejector carriage, grab one of the ejector arms from the Wildstyle page linked under the original models section. I would suggest using a front lever, I dont think there is enough clearance for a back lever.
Bear in mind to shoot mega XL you will need to improve the stock seal of the fate. I used some plumbers tape and silicone grease to get close to a perfect seal.
After seal improvements and a k25 spring swap, I'm hitting around 60-65 fps with MXL and a non rifled MXL silly shell. As I test more shells I will add more FPS readings.
Hope this helps you last a little longer against the horde! Happy hunting.