Silica pot for filament roll center
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I created this little container for the filament center that holds 40g of silica and keeps your filament ready to use!
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 40
- Makes
- 0
- Views
- 251
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Public Domain
Use the center of your filament roll to dry the silica inside a ziplock bag. Fits rollers with a hole of 50mm and 60mm in depth. Can be printed printed on PLA, PETG, ABS...
Specifications
- Thickness: 1mm wall
- Total weight: 22g
- Time: 3h (0.2mm with 0.6 nozzle and 0.4 thickness (I used composite filament)
- Capacity: 40g of silica gel
I modified some settings so that the thread is firm, for this I used 100% fill/100% walls. Thus, the contact area from the beginning to the end of the thread is 100% solid (in some tests I did previously this proved to be more robust than using the same amount of filler).
You can modify it as you see fit to print, I printed with a 0.6mm nozzle, but in the configuration I selected 0.4 standard wall thickness. You can use a 1mm nozzle if you want to do it quickly (lid + pot can be printed in 1 hour in this configuration). I recommend PETG for a 1mm nozzle, and reduce the speed a little.