1 / 3
VESA Display Mount for Milo CASA
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A modified version of genuine model by KurtineczDesigns for VESA swing arm with 131 spaced mount holes.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 14
- Makes
- 0
- Views
- 250
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Public Domain
I've redesigned the 148mm version of KurtineczDesigns as the arm found on Amazon here is only a 131mm spaced holes version.
The FreeCAD file is join if someone need to adapt to his arm: modify the sketch under M5MountHoles step.
Print Settings:
- Use the Milo structural printed parts settings (0.2mm layers, 6 walls, 12 top/bottom layers) and same type of plastic you have used for your CASA (tested with ASA).
- The piece is long: ensure to use quality filament brand and well heated enclosure for ABS/ASA.
- It's designed to be placed on the left of the CASA: don't forget to mirror the model in your slicer if you need to put it on the right.