Peering Cat Silhouette - Remix - Three Versions
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remixed for faster printing and for additional "fits."
- Rating
- 5 / 5
- Likes
- 105
- Downloads
- 351
- Makes
- 10
- Views
- 1,312
- Reviews
- 10
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial
The original version of this model is a great concept, but I thought it might be useful to “thin it down” for faster printing and less filament use. My initial remix was to simply “flatten” the original versions, and add an L-shaped "foot" so it would stand up on its own.
The L-shaped version worked, but since my window frame has a bevel, I ended up having to use tape to help keep it on the window. This led to the second version which is the same as the initial remix, but without the foot. The “all flat” version can be simple taped to a window for use.
But I did like the idea of the original “stand up” version, so I made a third version with a folding foot, so that the angle of the foot can be adjusted to match the bevel on the window frame.
Assembly and Use
Only the third version (with the folding foot) requires assembly.For this version, the foot is printed separately and is a snap fit onto the cat silhouette. Note that the foot has a top and bottom side (the bottom side will lie flat).
I found that the best way to snap the foot onto the cat silhouette is to rest the foot flat on a firm surface, and position the hinges on the cat silhouette over the tabs on the foot. I suggest pressing each hinge separately onto its matching tab; press down firmly while “wiggling” the hinged part back and forth a little until it snaps into place. It will be a tight fit. Repeat for the second hinge. The foot should be tight enough that it will stay in whatever position it is folded to.
Print Instructions
Print in PETG using the 3mf files provided, otherwise :
- 0.2mm layer height
- 2 perimeters
- 15% grid infill
Note : I used PETG, but PLA should work also.
CAD
The OnShape 3D CAD files for this are here :