1 / 6
Elegoo Orange Storm Giga Orca Slicer Profile V3  For 1 Or To 4 Print Heads — image 1
1 / 6

Elegoo Orange Storm Giga Orca Slicer Profile V3 For 1 Or To 4 Print Heads

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

ORCA SLICER Profile for Giga printer with 1 print head and 4 print head profiles 1 setting change for 2-3 heads

Rating
0 / 5
Likes
33
Downloads
1,349
Makes
0
Views
4,491
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

Made this for orca slicer for 1 print head or 4x print head. just change print bed x for 2 or 3 print head divide 800 by print head count. has pause command for layer height pause for you can change filament.

to print from wifi add the ip number from the printer on the top left where the printer is theres a wifi icon.

select printer profile for the beds you want to use read below for more info
 
v3 update tries to fix “by object” printing where the second items first and second layer changes all the build plates temp read bottom of machine notes

if i did this wrong please let me know what i should do. dont report me please.

also profiles for 0.6mm nozzles. yes i made the print speeds and acceleration slow you may adjust to you liking. silk is at 60mms on purpose because some colors like silver vary in color based on speed and heat.

For wattage 4 print heads and 2 bed sections while printing second layer was average of 620 watts.
1 bed about 520 watts

2 beds heating up is like 860 watts.

4 beds 1600 watts.
I recommend only heating beds up 2 at a time as even 20 amp surge protector can trip. 


what's posted below is in the notes of the printer profile settings.
--------------------------------------------------------------------------------------------------------------

Machine Start G-code  T #number is the plate number
"M190 T0 S" is the front left plate bed temp
T1 Front Right
T2 Back Right
T3 Back Left

Set Bed Temp Other Layer to "0" to stop other beds heating up after first layer
This is under Filament Settings.

the "4" Instead of "9" moves to next line of code where as "9" waits till finished heating up to move on.
So if you can handle more watts you can use M140 fo the first plates then M190 for the last plate then it will wait for those plates to heat up before heating up the nozzle unless you use only M140's
Just dont have the last Nozzle be M104 for they can heat up enough before starting the print.

you may add this back to have the hot end heat up to 140c while the beds heat up but will draw more power at the same time.
M104 S140

if you want to heat nozzles up one after each other Or change the [ ]to a number to make it different temp than each other
M104 T0 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize
M104 T1 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize
M104 T2 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize
M109 T3 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize

PAUSE and M600 are pause and filament change Gcodes that are supported under macros on Klipper.
make sure your printer has macros on. using the web access control panel you can see them under settings, bottom left then scrowl down to see macro group to see macros.
They both do about the same thing. make sure to hold the filament that extrudes out when you resume and then remove them as the printer started going back to the print to prevent oozing on the model.

To use this printer with multiple print heads its only just changing the build plate X size. for one print head its 800x  then you divide by number of print heads. example 4 heads are 200x, i recommend doing 199x or not have prints on the boarder incase of the prints connecting because print head 0,1 overlap the tiniest bit and merge prints same with 2,3


If doing multiple prints in sequence i highly recommend doing them front to back just incase for clearance of the x rail bar.
 

For "BY OBJECT" printing
i have added if statements in "after layer change gcode" like this example for beds 0 and 1 to be on not 2 and 3. i did this because the gcode calls M140 S0 when on the second obj second layer this turns off the heat beds, so this if statement will turn it back on the next layer if your third layer height is less than 3.6 as well as re adjust the print bed temp when  M140 S  first layer bed temp when the second object starts.
If you have different temps per nozzle please add statements like this as well but for the nozzle m104 t# s

{ if layer_z < 3.6 }M140 T0 S[bed_temperature_initial_layer_single] { endif }
{ if layer_z < 3.6 }M140 T1 S[bed_temperature_initial_layer_single] { endif }
{ if layer_z < 3.6 }M140 T2 S0 { endif }
{ if layer_z < 3.6 }M140 T3 S0 { endif }



----------------------------------------------------------------------------------------------------------------

Start gcode for all plates heating up two at a time
;FLAVOR: Klipper
;ELEGOO OrangeStorm Giga
;CFG-Orcaslicer-000000
;Number of Extruders: 4
;X(Width):200 Y(Depth):805 Z(Height):1010 
;Nozzle Size:[nozzle_diameter]mm 
M220 S100 ;Set the feed speed to 100%
M221 S100 ;Set the flow rate to 100%

M140 T0 S[bed_temperature_initial_layer_single]
M190 T1 S[bed_temperature_initial_layer_single]

M140 T2 S[bed_temperature_initial_layer_single]
M190 T3 S[bed_temperature_initial_layer_single]

G90
G28 ;home
G1 Z10 F300
G1 X67.5 Y0.5 F6000
G1 Z0.6 F300

M109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize

G92 E0 ;Reset Extruder
G1 X67.5 Y0 Z0.6 F300 ;Move to start position
G1 X167.5 E35 F400 ;Draw the first line
G1 Z0.8 F120.0 ;Move to side a little
G1 X162.5 F3000
G92 E0 ;Reset Extruder




End G code

G91 ;Relative positionning
M83
G1 E-2 F2700 ;Retract a bit
G1 X5 Y5 E-8 Z3 F2400 ;Retract and raise Z
G90 ;Absolute positionning
G1 X20 Y20 F9000 ;Present print
M104 S0 ;Turn-off hotend
M140 S0 ;Turn-off bed
M84 X Y E ;Disable all steppers but Z



----------------------------------------------------------------------------------------------------------------



Physical set up of 2-4 print heads warning

Warnings or suggestions about opening and setting this up.

I had my printer leveled before setting this up btw.

0. Put print head bar up for your self to work on it easier.

1. Make sure you get the slider out of the black foam in the rail box. ( wish these and other parts where easier to find or know they are there. a black item in black foam 😞 )

2. Start with a clean work area incase parts fall.

3. I did not loosen the belt for i didnt have to tighten it. When putting the rail slider on be careful not to loose the balls. ( i did but found it) when you slide it in from the left side dont have too much of angle try to go on straight for the balls dont get hit out. Keep the slider insert incase you remove the multi head rail for the balls stay in place and tape or seal it for it doesnt come out when you do not use it.

4. Remember what screws go in where some are very little bit bigger. Theres lock washers in where the front screws of the base plate screw into the belt connector so dont lose them.

5. Put the back screws for the head on loose for later adjustment.

 

Was about 40 screws to work with i think.

---------------------------------------------------------------------------------------------------------------

Tags