Angular Bracket
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.65 – €0.80 net (excluding VAT)
For file: CE3PRO_angular bracket two holes.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.72 excluding VAT (range midpoint).
- Weight reported by the author
- 6 g
- Print time reported by the author
- 52.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A simple 90° angle bracket to support shelves, available in 3 variants and printable without supports
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 48
- Makes
- 1
- Views
- 182
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
As stated in the summary, it is a simple angle bracket for supporting shelves or other types of platforms.
There are three variants depending on the fixing configuration to be used:
- Without holes: for sticking on both sides on flat surfaces.
- With two holes: for screwing on one side and gluing/supporting on the other.
- With four holes: for screwing on both sides.
These are the overall dimensions of the two-hole version:
Print Settings
Printed everything in PLA, without rafts or supports, at 0.2 mm resolution and 20% infill.
If you want to ensure more strength to the piece, you can change the "Wall Line Count" to around 4.
Also, to take advantage of the unsupported design, you'll want to print it sideways, like this:
Assembly
The mounting of the printed part will change depending on the use case and the selected variant.
The version without holes, gluing the two sides, is the easiest type of mounting, but may not hold if the weight is heavy enough.
I would recommend choosing the two-hole version, screwing one side to the wall or cabinet and supporting the shelf only on the top side. To keep it from sliding, you can use some double-sided tape.