Grenade Carp Fishing Bait Cage Mould
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mould to be used with carp fishing bait cage kits
- Rating
- 0 / 5
- Likes
- 23
- Downloads
- 189
- Makes
- 0
- Views
- 1,463
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Background:
Inspired by the likes of the classic “mielie bomb” used when fishing, especially for carp, I wanted to design a funky mould.
I decided to work around the shape of a grenade model I saw: Grenade MK2 WW2
Design:
The design consists of a split mould, identical in shape to allow for easier printing and/or replacement (if need be).
The hinge requires two parts to work, and these can be printed in under 5 minutes.
The opposing side can lock the mould using the same hinge mechanism if required.
You will require a minimum of 2X M3x16 screws and 2X M3 Nuts (4X if you hinge both sides).
I added a countersunk hole on the side of the mould to allow for flavour to be poured in if required.
Print Settings:
- Resolution: 0.16mm
- Infill: 25-30%
- Material: Any
- Supports: Everywhere
(Print orientation included)