1 / 11
Cute Penguin
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3 Cute Penguins (Single or Multicolor)
- Rating
- 4.667 / 5
- Likes
- 396
- Downloads
- 3,171
- Makes
- 15
- Views
- 7,071
- Reviews
- 12
Updated at source:
Model information
- Source
- Printables
- Category
- Animals
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Tips for printing:
- Supports: Yes = CutePenguin_3 / No = CutePenguin_1_2
- Layer height: 0.16mm (optimal)
- Wall loops: 3
- Infill: 15%
- Seam position: back
- Wall generator: Arachne !!!
- Detect thin walls: -
- Brim: Yes
Colors and filament I used (3 Color Version):
- PLA / White - for the face and eyes
- PLA / Black - for the body and eyes
- PLA / Orange - for the feet and beak
Or decide for yourself which colors and how many you want to use!
When you decide to print my multicolor Pre-Sliced (3mf file) for BambuLab I would recommend printing several models at once, not just one, to reduce waste!
Here is another important tip for printing in multicolor: All penguins (1 + 2 + 3) must be printed in Arachne! Not in Classic! (Wall generator). So that the lines are printed in the middle, equal and look better! (See picture below!)
