Airsoft ASG Scorpion Evo SI Style HPA Grip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
SI Style HPA Grip for the ASG Scorpion Evo
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 140
- Makes
- 0
- Views
- 1,178
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
This Grip only works with the HPA version of the ASG Scorpion Evo. For AEG grips, check my other Evo projects.
This is designed for Evos that have the Battery in the top compartment. You might be able to fit the battery/fcu wire through the center hole in the grip along with the IGL.
MAKE SURE YOU KNOW WHAT YEAR YOUR EVO WAS PRODUCED.
2018 and newer Evos are a bit different from the older, pre-2018 Evo.
If you pull back the bolt and your gearbox has the ASG logo, it is most likely 2018 or newer. If it's blank, it's pre-2018

The Open grip has no bottom plate.
There are two bottom plates, one for the OG line with the thread at the tap end, and one for custom IGLs
The grip is designed for M3 screws and nuts(The nuts glued in place), but self tapping screws will also work to hold the plate on.