1 / 6
UE Megaboom 3 base
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Base to hide cables from a store model UE Megaboom 3
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 9
- Makes
- 0
- Views
- 156
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Made this base cover after i bought a store model UE Megaboom 3 off eBay and downgraded the firmware to make it work. I wanted to hide the cables but also wanted the base removable so i can charge it.
The only additional thing you will need will be a 1/4-20 screw that is 20mm, mine has a thread length of 15mm
Printed in PETG
PRINT SETTINGS:
Nozzle: 0.4mm
Walls: 3
Bottom: 5
Top: 5
Infill: 25% Rectilinear
Nozzle: 230
Bed: 70