LayersFactory
Report model
1 / 5
Yet Another Fidget Infinity Cube v2 — image 1
1 / 5

Yet Another Fidget Infinity Cube v2

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Estimated printing price per file

€2.80 – €3.43 net (excluding VAT)

For file: Rounded 0.2mm 15% infill for Mini/Mini+ / yafic_v2_rounded_02mm_pla_mini_3h24m.gcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €3.11 excluding VAT (range midpoint).

Weight reported by the author
33 g
Print time reported by the author
3.4 hr
Source material
PLA
Estimate material
PLA
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

Austin Vojta

Austin Vojta

@austinvojta

v2 of my fidget cube features easier-to-print joints, more durable construction, and just as much fun!

Rating
4.913 / 5
Likes
16,980
Downloads
163,230
Makes
2,488
Views
421,458
Reviews
2,002

Updated at source:

Model information

Source
Printables
Category
Puzzles & Brain-teasers
License
Creative Commons — Attribution — Share Alike
DetailsFiles (5)Makes & comments (Makes: 2,488) (Comments: 3,065)Remixes (30)Collections (21,194)Related

Buy a printed fidget cube from me directly: AustinMakes.etsy.com

An addictive fidget toy that you won't be able to set down! Prints in one piece and works right off the print bed.

Note: vertical hinges will be stiffest after printing, but break in after a bit of fidgeting!

Printing tips

  • optimized for 0.2mm layer height and a 0.4mm nozzle
  • 10% infill is plenty, but up to 100% infill increases the weight, which is super satisfying!
  • part cooling on 100% fan speed (except first layer)
  • vertical shells on 2+ perimeters for strength
  • Cura users: disable No Skin in Z Gaps under your Shell settings

Variations

  • yafic_v2.stl is the original – easy to print & loved by many
  • yafic_v2_rounded.stl has rounded edges – more difficult to print, but nicer to hold
  • yafic_v2_rounded_topjointmod.stl has modified top joints – prints better on some (fast) printers
  • yafic_v2_test.stl is a smaller test file – use it to try out print settings

Tags

toypuzzlespinnerprintgameinfinityfidgetcubefidgetcubeinfinitycube