Color Changing LED Christmas Light Earring
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Battery operated LED earring
- Rating
- 5 / 5
- Likes
- 68
- Downloads
- 180
- Makes
- 2
- Views
- 944
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The girls needed some earrings for the season.
I printed the bulbs in spiral vase mode (9 at a time thanks to the new sequential printing option in PrusaSlicer 2.4, thanks slicer developers you are amazing).
The screw ends print fine without supports.
The LEDs I used are here https://www.amazon.com/dp/B07DL9DGNC
The Battery's are CR927
Just clip the LED leads long enough to just enter the holes in the top of the slot and put a drop of CA on to hold the LED, then spread the leads slightly with a small screwdriver, insert a battery to test (if it doesn't light turn the battery around), there is a small hole in the front to push the battery back out (with the other earring), when the LED is good to go CA the bulb on.
I did a battery test for 5 hours and the LED was still working