1 / 3
dji osmo action box with filter slots
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
compact little box for the dji osmo action 4 (3 works too) with 4 additional lense filter slots
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 105
- Makes
- 0
- Views
- 637
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial
Print recommendations:
- only tested with 0.2 mm layer height, should work just fine with any layer height tho.
- Filament does'nt really matter. ABS/ASA should work great. Mine's printed in PC-cf
Things:
- The hinges are made using 2.5mm metal rods which I glued into the inner sockets. The holes in the model have a 2.7mm diameter to ensure that they dont put any uneccessary stress onto the plastic. Meaning glueing them in place is basically necessary.
---------------------------------
If you like this thingamajig, please consider leaving a small tip :) kofi linked on my profile