1 / 4
Creality K1/K1C Hinged Lid Riser using stock hardware
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I remixed the corners so they can use the stock M3x8 cap head screws which are supplied with the printer.
- Rating
- 4.667 / 5
- Likes
- 49
- Downloads
- 645
- Makes
- 3
- Views
- 3,886
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution
I wanted a riser for my K1C which would allow me to secure the corners using the M3x8 screws which already support the printer lid.
I modified the Creality K1/K1C Hinged Riser corners to allow me to do this.
Features
- No supports required
- No bed adhesion required (i.e., autobrim, raft)
Additional parts required
- Four M3x8 screws which are already with the printer to support the lid
My print configuration
- Material: PLA
- Infill: 15%
- Infill Pattern: Gyroid
- Supports: No
- Brim/ Raft: None
The hole in each corner may need to be made slightly larger in post processing to allow some extra wiggle room to avoid cross-threading the screws into the holes.
Enhancements to the original design
- No additional hardware needs to be purchased. It is already installed in the printer,