1 / 4
122mm wall bracket for Archer C7
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mounting bracket to attach TP-Link Archer C7 to a wall, but any appliance with holes spaced at 122mm would work.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 93
- Makes
- 0
- Views
- 1,113
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Share Alike
BOM
For mounting router
- 2x M3 8mm countersunk bolts
- 2x M3 6mm heat insert
For mounting to a wall
- 2x or 3x Plastic wall plugs (No. 6 8x1) for 3/16 drill bit
- 2x or 3x 6x1 Drywall Screws
Assembly instructions
- Heat up and insert heat inserts in the outer holes
- Screw in M3 bolts into the inserts, leaving about 2mm of the bolt shaft to mount a router to the bracket
- Align the mount bracket and drill out 2 or 3 holes in the wall. You can skip drilling out the middle hole.
- Insert plastic wall plugs into the wall and align the bracket.
- Attach the bracket through the holes with drywall screws.
- Mount the router onto the protruding M3 bots