1 / 2
incense stick holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
designed to hold an incense stick at an angle to allow the ashes to fall neatly into the tray. The sleek design adds a t
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 102
- Makes
- 0
- Views
- 407
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Living Room
- License
- Creative Commons — Attribution — Share Alike
Printing Details:
- Material: PLA
- Layer Height: 0.15-0.2 mm
- Infill: 10-15%
- Supports: No supports needed
- Bed Size: Suitable for a printer with a bed size of 220 x 220 x 250 mm
Printer Used:
- Model: Anycubic Kobra 2 Neo
Design Features:
- Angle: The incense stick is placed at an angle to ensure optimal ash collection.
- Easy Printing: Designed for easy printing with no supports required.
- Elegant Look: The minimalistic design fits well with various interior styles.
Printing Tips:
- Ensure your bed is properly leveled for optimal adhesion.
- Adjust the infill percentage based on your preference for sturdiness.
- Use a slow print speed for the first layer to ensure good bed adhesion.