Modular fishing stand
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.80 – €2.20 net (excluding VAT)
For file: Rodholder_0.2mm_PET_Bedslinger_2h13m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.00 excluding VAT (range midpoint).
- Weight reported by the author
- 22 g
- Print time reported by the author
- 2.22 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A modular fishing rod stand Fully printable, material-efficient, and support-free design. Plug&Play.
- Rating
- 0 / 5
- Likes
- 36
- Downloads
- 159
- Makes
- 0
- Views
- 1,025
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
Modular fishingrod-stand
First of all, I'm sorry for any errors within this text, as English is not my mother tongue.
Completely printable object, material efficient, support-free design.
This is not a small print and will approximately use up to 650g of filament in the base version (with 4 stand extensions).
Only the legs need to be glued together.
This object contains a base version that can be extended in height and with add-ons.
All the STL files have been oriented for optimal prints.
The whole design was printed an function proofed to prevent any waste.
How to print
At least Petg is recommended for outdoor use. I designed tolerances of.2mm on each side and printed with a.2mm layer height with a .4nozzle (.3mm layer height should also be fine and accelerate the process).
I recommend printing the stand's and the rodholder's with a brim to ensure better adhesion and to use a little z-hop for the rodholder (upper piece), as the printer has to travel from left to right and can kick over the whole piece (as happened in testing).
I recommend printing the base model standalone first, which contains:
- Base
- Inner Leg: 3x
- Outer Leg: 3x
- Stand (optional: how many pieces; one piece adds approximately 200mm in height)
- Rodholder 1x
The addons can be printed and add to the base model.
How to Assembly
It's an easy plug-and-play assembly, which makes it very transport-friendly.
The inner and outer legs are designed to be glued together. The rest is plug-and-play and self-explanatory.