1 / 3
Basketball hoop and board for playpen — image 1
1 / 3

Basketball hoop and board for playpen

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Model information

Category
Outdoor Toys
License
Creative Commons — Attribution

Hello!

I am happy to share with you all my design of a minature basketball hoop for installing on a baby playpen.

The model consists on a two-color board with pegs and metric holes for a hanger on the back side and for the hoop mechanism in the front.

Hook is installed not directly to the board, but through a hinge mechanism that allows tilting, just like in professional hoops.

Since I have certain stock of hardware materials (nuts, bolts, etc.) I make use of those for this first version, but secondary goal is to achieve a version free of any non-printable hardware. 

Any criticism is welcomed, feel free to comment down any idea, features to improve, etc.

Printing

Any rigid material will do: PLA, PETG, ABS, ASA… Printed pictures display first version printed out in PETG, which gave me some small overhangs issues and certain stringing, but I think it will resist better without creeping than PLA.

It is recommended to print with an strength profile, at least the hinge elements. 4 to 6 walls and more than 30% infill, with 0.6 line width works well.

Supports: only necessary for Hinge_Part2, below teeth.

Post-processing 

Vertical printed holes might need some post-processing since verticality doesn’t suit well to circles. If overhangs or lack of circularity avoids the 8mm bolt to enter the 8mm holes in Hinge_Part1 and Hinge_Part2, machining the holes with an 8mm drill bit results in perfect play between holes and axis. 

The 4mm holes for M4 screws should work well even without supports, but again, drilling with a 4mm bit makes the job. 

Assembling

Required hardware:

6xM4 screws and M4 nuts. 

2 rubber bands.

  1. Pass the two rubber bands under the bridge of Hinge_Part1.
  2. Put Hinge_Part1 with the rubber bands and Hinge_Part2 together on top of a table. Pick the upper lace of the rubber bands and lock those into Hinge_Part2 teeth.
  3. Connect both hinge parts together with Bolt and Nut, like in the pictures.
  4. Pick the lower lace of the rubber bands and lock those into Hinge_Part1 teeth.
  5. Fit Hoop into Hinge_Part2 slot and fix the assembly with two pairs of M4 screws and nuts.
  6. Fix everything else together using M4 screws, like in pictures.

Future

I hope I can work in further features of this model, such as:

  • Stop for hinge: not more than 30º tilt.
  • Less hardware, more 3d printing.
  • Different hangers: current one fits only the top bars of my child playpen, but it is not difficult to design something to hang it from the wall, a table…
  • Simplified rigid version without hinge. 
  • Parametric version.

Tags