Tobii Eye Tracker - Vesa Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
This project could use improvement in the hardware section to make it more accessiable. Plastic printed hinge, tobii Bracklet to be a clip, rather than magnets, etc
Included fusion360 files to make your own mods
Hardware -
Torque Hinge - https://www.ebay.co.uk/sch/i.html?_from=R40&_trksid=p2332490.m570.l1313&_nkw=torgue+hinge&_sacat=0
2x Magnets 8mm by 5mm
M4 Nuts/Bolts
4x M4 10mm to 15mm
4x M4 Nuts
Included some spaces if your monitor vesa mount isn't flush with the back, you only max of 10mm of m4 screw to go into your monitor, some monitors don't have a backplate to stop the bolt. So you need either
4x 20mm m4 bolt > Vesa Mount (2mm)> Bracklet (8mm)> Monitor (10mm)
or
4x 30mm m4 bolt > Vesa Mount (2mm)> Bracklet (8mm)> Spacer (10mm) > Monitor (10mm)
Printed in PLA, 4 walls, 20% gyroid infill. - Bambu Lab
Inspired by >>> https://www.inclusive.com/uk/rehadapt-eye-gaze-bracket.html