LuxTools | Storage drawer devider (small)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Some simple deviders for the small drawers your LuxTools small parts cabinet.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 16
- Makes
- 0
- Views
- 127
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
The version for the large drawer devider can be found here: LuxTools | Storage drawer devider (large) von 3D_unicorn | Kostenloses STL-Modell herunterladen | Printables.com
These simple deviders help you to split the small drawers (13.6cm x 5.4cm) of your LuxTools small part storage / cabinet into smaller compartments. Could not really find them in any store, so designed them myself with CAD. There are two version:
- A normal devider for the small drawer which is 34mm x 50mm x1.5mm
- A T-devider, to get even more compartments out of the drawer (2 versions, one with rounded inner angels and one without - whatever you prefer).
This way you can select exactly the configuration you need.
You can go for 100% infill (then you won't see the pattern) but to save filament i selected 20%.
The rounded corners belong downwards for the T-devider, as the inner angle of the drawer is also rounded - otherwise it won't fit.
Important: Sometimes my slicer asked me if the model should be converted from meter to mm. Please click “yes” in this case - couldn't figure out why. As the standard in my CAD is mm and not meter.
This is one of my first models i designed, please let me know if it can be improved!