Stand in Greek architectural style
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.60 – €1.95 net (excluding VAT)
For file: Hlavice_Korintska_0.4n_0.2mm_PETG_MINI_2h0m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.78 excluding VAT (range midpoint).
- Weight reported by the author
- 19 g
- Print time reported by the author
- 1.99 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Stojan ve stylu řecké architektury
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 25
- Makes
- 0
- Views
- 175
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution
EN:
The stand in the style of Greek architecture is modular and consists of the following parts:
- a universal column with a thread for head screwing
- 3 versions of interchangeable heads (Doric, Ionic and Corinthian)
- 5 length variations of the individual horizontal beams (22, 20, 18, 16 and 14 cm) or a compact piece of 17x16 cm
The columns and beams are printed without supports, the interchangeable heads can also be printed without supports, but in this case the long bridges have to be switched on and at least 4 perimeters have to be set. The recommended layer is 0.2mm.
CZ:
Stojan ve stylu řecké architektury je modulární a sestává z následujících částí:
- univerzální sloup se závitem pro našroubování hlavice
- 3 verze vyměnitelných hlavic (Dórská, Ionská a Korintská)
- 5 délkových variant jednotlivých vodorovných trámů (22, 20, 18, 16 a 14 cm) a nebo kompaktní díl o rozměru 17x16 cm
Sloupy a trámy se tisknou bez podpor, vyměnitelné hlavice lze rovněž tisknout bez podpor, ale v takovém případě je nutno zapnout dlouhé mosty a nastavit alespoň 4 perimetry. Doporučená výška vrstvy je 0,2mm.