Printable Back Shell for FunnyPlaying FPGBC Kit
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This model is designed specifically for the Funny Playing FPGBC Kit
- Rating
- 0 / 5
- Likes
- 8
- Makes
- 0
- Views
- 662
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
This model is designed specifically for the Funny Playing FPGBC Kit and does not fit the OEM motherboard.
Download the front shell here:
Assembly is quite straight forward and the battery cover is held on with the extra Phillips head screw that is not used during mod builds (although, you can fit a Triwing if you have extra).
PRINTING:
Support is required!
- The back lower (BL01) has custom supports that I designed but feel free to use slicer supports if you prefer that. I changed the Bridging Angle to 90 degrees because of the bridging at layer 76 (13.4mm). Consider using Seam Painting to move the seams away from the outer corner (see picture) to help it mate with the back upper (BU01).
- The battery cover has tabs that require support.
Also, there are lots of small bridges in this design. Any modern 3D printer should have no issue!
FEEDBACK:
If there are specific issues with the model, please DM me on Printables or Instagram so I can update the model for everyone!
Want to print and sell this model?
Join my Printables Club Reseller tier to license and sell printed versions of my models!