1 / 1
Ethernet bracket for HP Prodesk 600 G5 mini
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I made a simple ethernet bracket that takes the place of the flexio module in a HP Prodesk 600 G5 mini
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 90
- Makes
- 0
- Views
- 820
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
I wanted to use the empty M.2 slot that was used for the Wifi card to add a 2.5gb port, so I bought a M2 A+E to ethernet adapter on aliexpress and made this adapter to make it somewhat clean inside the computer. It's not perfect, a tiny bit annoying to install but in the end it works well for me.
I used 2 * M3 (5mm) hex screws to hold the ethernet adapter and the bracket together.
I used 2 * M2 (5mm) hex screws to hold the bracket on the motherboard.