Lock Nut M40 1.5mm pitch
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple M40 lock nut, with a thread pitch of 1.5mm.
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 125
- Makes
- 1
- Views
- 331
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Thickness is 7mm, and spanner width is 50mm.
Modeled with ISO profile, using tolerance 6H from ISO 639-3 (minor diameter can be up to +0.3mm).
Therefore, I modeled it with a +0.15mm margin, which should be enough whether you over or under extrude. Note however you still need XY hole compensation in slicer.
Recommended print settings (for a 0.4mm nozzle):
- 0.16mm layer height
- Print without support
- Variable extrusion width (Arachne)
- Inner/outer/inner walls
- XY hole compensation of 0.15mm
- Strength profile with 4 walls and 25% gyroid infill
- Concentric 1mm top and bottom pattern, with ironing on all top surfaces
- Scarf seams (external and internal)