1 / 3
medal (old army look-alike WWI)/replika vojenských medailí — image 1
1 / 3

medal (old army look-alike WWI)/replika vojenských medailí

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Props I made for summer camp, It should look like old army medals, not historically accurate :)

Rating
5 / 5
Likes
18
Downloads
191
Makes
1
Views
628
Reviews
1

Updated at source:

Model information

Category
Props
License
Creative Commons — Attribution

Slicer settings I used for each medal:

 

The star medal was printed using bronze filament with default 0,05mm layer height settings

The medal ribbon was printed with 0,2mm layer height with 2 color changes, starting with red filament, print 2 layers (0,4mm), then change to white, print one layer (0,6mm), rest was printed in bronze filament. Don't forget to turn on ironing like I did :-)

The pentagram medal was printed with 0,2mm layer height and 2 color changes, starting with silver filament print 4 layers (0,8mm), then print 2 layers with red filamentand change back to sliver that you started with. A perfect model for ironing once again.

For both versions of the sword medals I used 0,2mm layer height with adaptive layer height turned on with focus on quality and bronze filament.

 

Assembly:

In the back of the ribbon is a square hole for a safety pin, which I glued in place with a hot glue gun, it holds surprisingly well. It is strong enough to hold the medal on clothing securely, but you have to press it in while the glue is still really hot to ensure a good connection. It is strong enough for general use like running with in on but if you tug on it hard enough, it will rip the safety pin and the glue off. The print itself will remain intact so you can try to glue it again with the same metod or if you need to make the connection almost indestructible you can use epoxy glue.

 I connected the ribbon itself with the medal by bending a copper wire with pliers, which I got from stripping an old electrical house wire.

 

If you want to modify the models in any way, feel free to do so.

That's it, I hope you like the models, and happy printing! :)

 

PS: sorry for the low quality pictures of the medals on people, I didn't want to include their faces so I had to crop a lot

Tags