Holga 120 circle mask
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Circle Mask insert for 120 Holga cameras
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 36
- Makes
- 0
- Views
- 310
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Share Alike
This is a circle mask insert for Holga 120 analog cameras. The circle is a 55 diameter on the film.
Printing
I made mine in PETG since the latches on the side have to move and bend a little.
Assembly
Since all three parts are printed seperately you have to glue on the film guides after printing. before that you also have to remove the little tabs on the side of the main body, otherwise the back of the camera won't fit.
It is recommended to sand the surface and especially the rounded sides after printing to prevent the mask scratching the film.
After removing the tabs and sanding, just glue on the side rails/ film guides with superglue. Be careful not to use too much and soak up any excess with a cotton swab.
Mods/ Different Shapes
I do already have a heart, star, and oval version of this mask. If you have any other ideas just comment, and I can see if I can do it :)
Updates
07.2024: added a “flash” version with holddowns for the batteries