1 / 3
Filament runout bracket for ENDER3 V3 SE KE
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A runout bracket used when filament is not used on the top of the printer.
- Rating
- 5 / 5
- Likes
- 12
- Downloads
- 113
- Makes
- 1
- Views
- 792
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution
- Since I use a dryer, I no longer need the filament top holder. The location of the runout sensor could be fixed to an existing holder and used, but the location was a bit poor.
The concept is to allow it to be inserted into the frame at the top so that its position can be adjusted freely. Also, a Teflon hose that would act as a guide had to be assembled. - If you don't need a Teflon hose guide, just print the runout bracket.
- Additional material required: 1 m3 nut.
- The Teflon hose guide can be assembled by inserting it into the runout sensor.
- Some support is required because of the hole through which the Teflon hose passes.
