Golfball Ornament
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tree ornament in the shape of a golf ball in three parts.
- Rating
- 5 / 5
- Likes
- 15
- Downloads
- 94
- Makes
- 1
- Views
- 525
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution
Ornament in the shape of a golfball. All parts can be printed without any supports.
Note that the tolerances are based on a 0.2mm layer height. For the snap ring it is advisable to disable elephant foot compensation or add a brim. Otherwise the first layer is a lot of very small lines. I printed it with Gold coloured PLA and a 0.4mm nozzle.
To assemble, snap the ring first in the bottom. Then notice the notch on the inside. Lining up the notch on the top half with the notch of the bottom half assures the dimples line up on the outside. There is a ring shaped hole in the top for string or ribbon.