1 / 1
E61 ABS Heat Shield
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
ABS Heat shield to protect you from burning against an e61 espresso machine grouphead
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 31
- Makes
- 0
- Views
- 171
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
1, Print in ABS as an e61 grouphead can reach 95 degrees Celsius
2. I used 20% infill and a 0.3mm layer height with a 0.6mm width on a 0.6mm nozzle
3. Print speeds where 40 - 50mm/s
4. Print with brim and draught shield (Cura) and with supports