Makita DVP180 Sealing Ring

Description: Tired of oil spills when using your Makita DVP180 vacuum pump? Struggling to find a proper sealing ring? Here's a custom solution just for you. This mold allows you to create a better sealing ring for the oil container, ensuring a tight fit and preventing those annoying leaks.

Features:

• Purpose: Designed specifically for creating a custom o-ring for the Makita DVP180 (Fig. A,1).
• Design: The mold consists of four interlocking parts (Fig. C,4), securely held together by an M6 bolt (Fig. C,5).
• Improved Fit: The o-ring produced is slightly smaller for a snug fit on the oil cap, enhancing the seal (Fig. A,2).
• Usage: Simply use a medical syringe (Fig. C) with approximately 3ml of liquid rubber. Ensure to degas the liquid before injecting it into the mold for best results.

Instructions:

1. Assemble the four parts of the mold using the M6 bolt to hold them together securely.
2. Degas the liquid rubber thoroughly to remove any air bubbles.
3. Using a medical syringe, inject about 3ml of the degassed liquid rubber into the mold.
4. Allow the rubber to cure completely before removing the newly formed o-ring from the mold.
5. Fit the new o-ring onto the oil cap of your Makita DVP180 and enjoy a spill-free operation.

Say goodbye to messy oil spills and hello to a perfectly sealed oil container with this custom o-ring mold. Download and print now to upgrade your Makita DVP180 vacuum pump!