Safe | Vault | Bank | Money Bank | Piggy Bank
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Compact safe with mechanical lock and coin slot. Protect money and valuables. No extra parts needed π
- Rating
- 4.897 / 5
- Likes
- 717
- Downloads
- 2,382
- Makes
- 31
- Views
- 13,542
- Reviews
- 29
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons β Attribution β Noncommercial β NoDerivatives
Your safe can finally be safe! You can choose several number combinations according to your preferences π
No Additional Parts Required. This safe doesn't need any bearings, screws, glue or additional purchased parts.
Dimensions 140x130x140 mm. Spacious enough for your valuables, yet compact enough to fit anywhere.
Include coin slot.
Spacer problem
In some cases it happened that the spacer was too loose. More clearance is added here, for smooth turning of the dial. However, each printer has different clearances, so I recommend increasing the width of the spacer in the slicer. Until then, so that the spacer is not too loose and at the same time the dial can be turned smoothly. (The recommended step of increasing is +0.1 mm)
Or if the Spacer is too loose, use glue.
Β

Assembly instruction step by step
is in the model picture.
Or Video Below π
Number | Name | Amount |
01 | Door Base | 1 |
02 | Spur Gear | 4 |
03 | Wheel | 1 |
04 | Rack Gear | 3 |
05 | Frame | 1 |
06 | Retainer | 1 |
07 | Cover | 1 |
08 | Hinge | 2 |
09 | Case | 1 |
10 | Screw | 4 |
11 | Pin | 2 |
12 | Dial (#1-#6) | 3 |
13 | Spacer | 1 |
14 | Rack Gear-Lock | 1 |
15 | Spur Gear - Center | 1 |