Voron V0.2 Top Hat Cat Flap
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is Chirpys modified Cat flap that uses the FT Panel Clips.
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 16
- Makes
- 0
- Views
- 426
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
INTRODUCTION
Thanks to Chirpy for creating the original Top Hat Cat Flap I've been using on my V0.2 for a while now. Since the creation of the FT Panel Clips for the Voron V0.2 I decided to update the Top Hat Cat Flap to match the theme. The hinges mount using the quick release (no nuts and screws required).
IMPORTANT NOTE: - If the clips are too lose. Check your printer calibration as it is likely that the Brackets have too much squish which would affect the actual height the keys are to lock in place.
INSTALLATION INSTRUCTIONS
These are the easiest Panel clips to date as they do not require 1mm or 3mm foam tape to be used (not supplied in the Voron V0 kits). These panel clips are designed to replace the original parts without the nut and screws.
- Uninstall the original top hat cat flap printed parts.
- Unscrew the top right extrusion to remove the nut in between the 2 short extrusions.
- Attach the parts using the printed keys.
- Replace the 2 printed parts that are held on with VHB tape as the updated parts match the design.
- ENJOY!
Should you have any queries reach out to us on Discord
Hope that you appreciate the amount of time and effort to turn around such a big modification. If you like my designs and would like to contribute to fund filaments and other equipment required for prototyping, please do so at my paypal.me or Ko-fi. Your support is greatly appreciated :)
Do let me know if there are any other combination thickness panels and foam tape that you want to use and additional STL's can be provided.
CHANGE LOG
06-Jul-24
- Added updated Door Handle.