NV Jibbitz
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.08 – €0.09 net (excluding VAT)
For file: NV Bubble_0.4n_0.15mm_PLA_MK4IS_5m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.09 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 5.4 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This Jibbitz is similar to the logo for Neuqua Valley High School.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 10
- Makes
- 0
- Views
- 67
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Creative Commons — Attribution
Print Instructions
You can optionally insert a color change in your slicer at layer 14. (In my picture above, layers 1-13 are the base in blue; layers 14-26 are the letters in yellow.)
Assembly Instructions
You will print the NV part and the base separately and glue them together with a couple drops of superglue. The NV part has a cutout on the back side so that you can locate and attach the base.
Design Notes
Thanks to @LittleMolloy for designing the base. The model for the base is here; I also included the file above for your convenience - but that file is not my design.