Foot_V2.0 for prusa
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My second Foot for the Prusa lineup.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 19
- Makes
- 0
- Views
- 241
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution
In order to lower the centre of gravity on the printer and therefore improve stability the Foot_V2.0. Approx. half the hight of the V1.0. Uses the same squashball as the V1.0 (pro with two yellow dots). In my opinion not as pretty but you get a lower printer position relative to it´s surface. Also it uses just one nutstone instead of two. An extension fits into the profile for a rigid fit. M3 screw as usually.
Nutstone:
https://www.prusaprinters.org/prints/57139-hammermutternutenstein-nut-8-m3-prusa-mini-mk3#_ga=2.155700859.1140478218.1638971047-1363159943.1636108697
Material: Prusament PETG Galaxy Black
Temp: 250°
Bed:90°
Layer: 0.20 Speed
Infill: 30% cubic
Support: yes (Z-distance 0.2, xy-distance 80%), also check the pictures
Bedtype: Satin
Perimeter: 4
Rest ist the profile of Prusament PETG